Takky Connector Correlation Tables


Pin assignment of connectors
Left : 630 connector, right : analog board connector.



Connector wiring diagram

  1. The monitor ID is set to VGA (640 x 480) in this diagram. See S19-21 of the '630 connector' in the table.
  2. A circuit inside the dotted line is an additional power supply only needed for PCI logic boards.



Wiring to Analog Board

630 ConnectorAnalog Board ConnectorHDD Power Supply Connector
-12 V inputS11
GNDS22
ADB Power supplyS35
GNDS46
Power off commandS57
S6
+5 VS723
S8
Brightness control outputS917
GNDS1018
Contrast control outputS1119
GNDS1210
Video signal output(Blue)S1311
GNDS1412
Video signal output(Green)S1513
GNDS1614
Video signal output(Red)S1715
S18
Monitor ID input 2S19*20
Monitor ID input 1S20*24
Monitor ID input 0S21*25
GNDS228
Composite signal outputS239
GNDS24
S25
GNDS26
S27
GNDS2829
Sound output(R)S2928
GNDS3031
Sound output(L)S3130
S32
Sound amplifier control outputS3337
S34
Microphone inputS3521
GNDS3622
S37
S38
S39
S40
+12 VP1-P2(Yellow)P9(Yellow) 1(Yellow)
GNDP3-P4(Black)P7(Brown) 2(Brown or Black)
GNDP5-P6(Black)P5(Black) 3(Black)
P7-P8
+5 VP9-P10(Red)P3(Red) 4(Red)
+5 VP11-P12(Red)P1(Red)

Caution * : In case of VGA modification, do not connect the monitor ID inputs (S19 - S21) with the analog board connector, but connect S19 and S20 together and leave S21 unconnected (or open).


Wiring to FDD

630 ConnectorFDD Connector
F11
F22
F33
F44
F55
F66
F77
F88
F9
F1010
F1111
F1212
F1313
F1414
F1515
F1616
F1717
F1818
F1919
F2020



Wiring to Push Button Board

630 ConnectorPush Button Board Connector
F211
F222
F233
F244
F255
F2610
F277
F288
F299