NMEAGEN107.zip (320KB)
Update: Oct. 26, 2007
MD5:5eb1c9cf2c33e899c1dada2b1b88852f

What new.
1. The distance was precisely calculated.
2. The NMEA sending was stopped for the "Jump" button click when idling.

Ver 1.06 Oct. 2007
1. "Course/True north" = 0 when idling was abolished.
2. Manual supplement.

Ver1.05 Oct. 2007
1. When the speed was filled in on the last course data, it was made to return to the
   starting point.
2. The number of digits below the decimal point of the distance report was adjusted
   according to the value.
3. The repeat-output function was added.
4. "Jump" under idling was enabled.

Ver1.04 Sep. 2007
1. The display of the distance and the time required was added (present span/total).
2. The mistake of the span number of partitions was corrected.

Ver1.03 Sep. 2007
1. Setting had made it succeed before when it was drag & drop of the configuration file,
   the port number, the baud rate, and the display position were blanks.
2. In addition correction of detail.

Ver1.02 Sep. 2007
1. The font can have been specified by the configuration file.
2. After the serial port had been opened, an effective port was acquired again.
3. It was corrected not to have preserved the RMC mode in the configuration file.
4. The number of digits of integer part of latitude was fixed to four digits and
   the number of digits of integer part in the longitude was fixed to five digits.

Ver1.01 Sep. 2007
1. Calculation of "Track made good, degrees true" of a RMC sentence was re-calculated for
   every point (Course of the true north standard).